Minutes, IBIS Quality Teleconference June 10, 2003 9-10 AM EDT (6-7AM PDT). Upcoming Meetings June 17, 2003 9-10 AM EDT (6-7 AM PDT) Phone: 408-974-8478 or 800-249-5618 Meeting access: CONFERENCE SERVER 1, Conference ID: 54644 June 23, 2003 8:00 AM to 5:00 PM IBIS SUMMIT at DESIGNCON EAST Phone Bridge number to be announced --------------------------------------------- - Roll Call Adam Tambone adamt@maine.rr.com Barry Katz bkatz@sisoft.com Benjamin P Silva benjamin.p.silva@intel.com *Bob Ross bob@teraspeed.com Brian Arsenault arsenault_brian@emc.com Eckhard Lenski Eckhard.Lenski@siemens.com Eric Brock ebrock@sisoft.com Gregory R Edlund gedlund@us.ibm.com Hazem Hegazy hazem_hegazy@mentorg.com John Figueroa jfigueroa@apple.com Katja Koller Katja.Koller@siemens.com Kevin Fisher kfisher@sisoft.com Kim Helliwell kimgh@apple.com Lance Wang lwang@cadence.com Lynne Green lgreen@cadence.com *Mike Labonte milabont@cisco.com Peter LaFlamme plaflamm@amcc.com *Robert Haller rhaller@sisoft.com Roy Leventhal Roy_Leventhal@3com.com Sherif Hammad sherif_hammad@mentorg.com Todd Westerhoff twesterh@cisco.com Tom Dagostino tom@teraspeed.com Kazuyoshi Shoji kshohji@hitachi-ul.co.jp *Sadahiro Nonoyama nonoyama@hitachi-ul.co.jp Everyone in attendance marked by * First Time attending IQ call *John Angulo john_angulo@mentorg.com NOTE: "AR" =3D Action Required. -----------------------MINUTES --------------------------- - Review of minutes for May 20, 2003 Approved. - Announcements EIA Call for Patent Disclosure. No company declared a patent. - AR Review Kim H: Put together slides for the DAC Summit. DONE Mike Labonte: Update document and covert to text. DONE - Opens for new items DAC Summit feedback DesignCon East Summit planning RAMP keyword checking The general consensus on the IBIS DAC summit was very positive. There were approximately 19 folks, which is down a little from previous summits. Feedback of the IBIS quality update at DAC presented by Kim Helliwell was very positive. There was also discussion of the Open source parser proposal. The IQ presentation is available on the ibis quality website. http://www.sisoft.com/pdf/IBIS_SUMMIT_IQ_DAC_2003o.pdf AR Bob Ross: Presenters from DAC Summit should confirm to Terry Roulic troulic@sisoft.com if they are presenting at Designcon Summit ASAP. And Even if they are presenting via teleconference. They should also make any time for presentation requests known. AR Open Forum: additional off line planning is required for Designcon Summit. - Detailed Documentation review Suggestions from previous meeting taken care of. Mike has updated the Waveform_processing.doc into two separate text documents following the revision and naming conventions of the existing documents. IQ_4_4_ramp_data.txt IQ_4_5_wave_proc.txt These document now have keywords and quality levels added. Mike highlighted the changes made in the ramp_data.txt document. It was suggested that level 0 checks covered by the latest ibis parser (3.2.9) should be indicated as such. We reviewed the intention of the level 0 and level 1 checks terminology. It was suggested that this may need to be added to each document. All of the documents will eventually be combined, thus this is not necessary. Item 3 will have the following wording added (i.e. no capacitors) Discussion on how to crosscheck ramp to VT curves if they have similar or the same fixture using the load line and operating point. This is not presently done in the parser. AR: John Angulo to investigate if a parser bug is warranted for Ramp to VT curve cross check. Suggested the "binary order of magnitude" be changed to "within a factor of 2". Mike though that having the ramp off by an (decimal) order of magnitude was insufficient. AR: Team to independently review levels in ramp document and provide feedback to Mike of any inconsistencies with definitions. Next we reviewed the waveform and processing document. Mike began by reviewing the prelude to summarize what waveform processing means. Reviewed some of the parser checks vinh, vinl on inputs is required , vmeas on outputs. Briefly discussed how the IQ documentation should handle sub models. AR Mike: implement updates to document. - Plans and Schedule for next meeting June 17, 2003 9-10 AM EDT (6-7 AM PDT) Phone: 408-974-8478 or 800-249-5618 Meeting access: CONFERENCE SERVER 1, Conference ID: 54644 - Meeting adjourned at 10 AM EDT (7:00 AM PDT).